EMC Filter Supplier

What is an EMC filter?
EMC filter, also known as "electromagnetic compatibility filter", is mainly used in instrumentation and automatic control systems. It is used to suppress and eliminate the strong electromagnetic interference and electric spark interference on the site of the industrial automation system, correct the on-site instruments and meters, and ensure the safe and reliable operation of the automation control system.

EMC power filter for 3-phase 380V inverter emc product properties --The current can reach 10A with one or two (5*20mm) fuses --(R5) Medical specialty products are designed to meet the requirements of IEC/EN60601-1 for safety distance, low leakage current, and ultra-high withstand voltage. The -- There are a variety of parts combinations to meet the EMC test of different customers --Products can be customized according to different test curves --Can offer EMC thorough test for free Technical parameters Maximum voltage: 250 VAC, 50/60 Hz Working frequency: DC to 400Hz Rated current: 1~10A@40°C, 50°C(UL/CUL) Dielectric strength: L-N 1450 VDC | L/N-G 2000VAC/2250VDC | L/N-G 4000 VAC (Type R5) Protection class: IP40 according to IEC 60529 Climate category: -25°C~+85°C(25/85/21) Construction standard: UL1283, CSA C22.2 No.8, IEC/EN 60939, CQC GB 15288/GB 15287-2008 Fire rating: UL 94V-0 area of application --Portable electrical and electronic equipment, medical equipment, measurement and test equipment, small and medium-sized mechanical equipment and household appliances, single-phase power supply, switching power supply-- Appropriate certification --UL/cUL, TUV, CQC, CE, RoHS, CB/KC, ISO9001:2008	emc-emi mains filter ac fn3270h-65-34 Part Status: Active Filter type: three-phase (delta connection) Configuration: Single Tier Voltage - Rated AC: 480V Frequency - work: DC ~ 60Hz Applications: inverters, power drive systems Certification bodies: CSA, ENEC, UR Working temperature: -25℃～100℃ Installation Type: Basic Installation Finish Type: Finish Block Voltage - Nominal: AC (phase earth/neutral) 300 V Rated Voltage: AC (phase-to-phase) 520V Current: 65A	fn 2450 series high pass filter    Product introduction (this series of products can provide a terminal block wiring method) Rated current 1A-300A optional Optional medical equipment special type (B series) Solder tabs, screws and terminal termination methods are optional (above 300A is copper bar execution) Can be customized according to customer needs features and benefits -- Applicable to three-phase power supply system with neutral wire - Small size, high cost performance, easy to install, especially suitable for products with limited space -- The SJS280 series uses a common mode filter circuit design, an ordinary three-phase four-wire filter -- Good common mode and differential mode filter effect in the range from 150 kHz to 30 MHz field of application Machine tool equipment, inverter power supply, frequency conversion equipment, mechanical equipment, automation equipment, medical equipment and other electronic equipment powered by a three-phase four-wire system

Introduction to EMC Filters
The EMC filter is connected in series to the power inlet end of field instruments and automation control equipment. It is used to eliminate the interference to the power supply generated during the start-up, braking and operation of various large-scale inductive equipment such as fans, water pumps, compressors, motors, water turbines, generators, and vortex machines. The EMC filter is connected in series to the relay control output terminals of instruments and automation control equipment. It is used to eliminate electromagnetic interference and spark interference generated during power-on and power-off of various inductive loads such as post-stage contactors, solenoid valves, fans, and water pumps.

Classification of EMC filters
1. EMC filter
2. Filter for EMC shielded room
3. EMC Feedthrough Capacitor
4. EMC feedthrough filter
5. EMI suppression capacitor

Technical indicators of EMC filter:
Rated voltage: 380VAC
Rated current: 30A～60A
Working frequency: 50/60Hz
Temperature range: -25℃～+85℃
Temperature rise: < 30°C
Hipot test: (1 minute)
Line-Line: 1450VDC
Line - Ground: 1500VDC